Ensuring the quality of a product on which you have your eyes for a long time can be tricky. For every product in the market, there are several models and competitors available. And relying only on reviews is not always the best way of picking the best 120V Plasma Cutter, and I will tell you why!
The reviews we usually check on the internet before getting our hands on a product typically have the same chatter. These reviews are usually dotted with similar patterns to highlight the pros and cons to help you make a decision. However, a good review consists of more than just the features, pros, and cons.
After deep research and scanning through the market well, we have prepared this guide for you. Here, we will share the details of the best products and how to choose them properly. So, stay with us till the end of the guide.
120V Plasma Cutter : Our Top Picks
As an Amazon Associate, we earn from qualifying purchases. For more details, read here.
| Place | Image | Product Information | Score | |
|---|---|---|---|---|
| 1 |
|
Forney Easy Weld P Plasma Cutter Green by Forney |
9.1
|
|
| 2 |
|
Hobart Airforce ci Plasma Cutter with Built-In by Hobart |
9
|
|
| 3 |
|
Klutch PFC Dual-Voltage Plasma Cutter - Inverter by Klutch |
9.3
|
|
| 4 |
|
Lotos LT Amp Air Plasma Cutter Inch by Lotos |
9.6
|
|
| 5 |
|
Warfox Plasma Cutter V Dual Voltage Plasma by Warfox |
9.4
|
|
| 6 |
|
Plasma Cutter Spectrum PSI ft by Plasma |
9.8
|
|
| 7 |
|
Hobart - AirForce i Plasma Cutter by Hobart |
9.7
|
|
| 8 |
|
Hypertherm Powermax XP Building America Edition Hand by Hypertherm |
9.1
|
|
| 9 |
|
Ecotrees Travel Adapter v to v Travel by Ecotrees |
9.5
|
|
| 10 |
|
Lincoln Electric Plasma Cutter P A V by Lincoln |
9.2
|
11 Best 120V Plasma Cutter Reviews for Beginners
Forney Easy Weld 251 20 P Plasma Cutter,Green, 20 Amp
Highlighted Features
- CUTS- Mild steel, aluminum and stainless steel from thin material to 1/4"* (6.35 millimeters) with ease! *(Mild Steel)
- EASY TO USE- All you need is 120 volt power source and 1.5 CFM of compressed air. Built in regulator and air dryer make operation a breeze
- DRAG TORCH TECHNOLOGY- Allows you to drag cutting tip in direct contact with the metal you're cutting for smooth consistent clean cuts
- LIGHT AND PORTABLE- Forney's 120-volt 20 P Plasma Cutter is generator friendly so on the go cutting and moving to different job sites is possible
- RUGGED- All metal case. Built to take the day to day
Additional Info :
| Brand | Forney |
| Color | Grey |
| Item Dimensions | |
| Height | 4 |
| Width | 37 |
| Length | 44 |
| Weight | 88.11 |
Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V , Brown
Highlighted Features
- Built in Air Compressor
- Cuts faster than oxy fuel
- Smaller heat-affected zone for less warping
- No gas pressure settings for flame tuning needed
- More precise cut, thinner kerf, less slag to clean up
Additional Info :
| Brand | Hobart |
| Color | White |
| Item Dimensions | |
| Height | 8 |
| Width | 27 |
| Length | 40 |
| Weight | 96.26 |
Klutch PFC700 Dual-Voltage Plasma Cutter - Inverter, 120V/230V, 45 Amp Output
Highlighted Features
- Dual 120 Volt and 230 Volt capabilities provide versatility
- Wide 20-60 A output adjustment for fine tuning amperage needs
- (PFC) Power Factor Correction for increased cutting performance
- Continuous pilot arc is ideal for use cutting expanded metals, highly rusted metals and fencing
- Water separator provides longer lasting life for consumables
Additional Info :
| Brand | Klutch |
| Color | Silver |
| Item Dimensions | |
| Height | 3 |
| Width | 28 |
| Length | 41 |
| Weight | 44.03 |
Lotos LT3500 35 Amp Air Plasma Cutter, 2/5 Inch 10 mm Clean Cut, 110V/120V Input with Pre Installed Air Filter Regulator with NPT Quick Connector, Brown
Highlighted Features
- ★ PORTABLE but POWERFUL--the Lotos LT3500 can easily cut up to 2/5”(10 mm) metal under maximum output with ultimate portability weighing only 18lbs; The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.
- ★ QUICK Setup--the per installed Air filter Regulator with NPT 1/4” industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.
- ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input, Minimum Circuit Breaker Size Requirement: 40 AMP at fully output(35AMP/3/8inch cut); Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
- ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input, Minimum Circuit Breaker Size Requirement: 40 AMP at fully output(35AMP/3/8inch cut); Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
- ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
Additional Info :
| Brand | Lotos |
| Color | Silver |
| Item Dimensions | |
| Height | 14 |
| Width | 34 |
| Length | 40 |
| Weight | 92.62 |
Warfox Plasma Cutter 120/240V Dual Voltage Plasma Cutting Machine, Max Cutting Thickness 14mm, Clean Cutting Thickness 10mm in 65PSI (CUT50D 120/240V)
Highlighted Features
- Plasma Cutter, 120V/240V 50A plasma cutter with IGBT inverter technology, long life and efficient higher than mosfet machine. IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting
- Plasma cutting machine has current display function and air post time adjustment. Adjustment range is 2-20S, users can adjust the time for post air, effectively providing cooling,extend consumable's working life
- Max cutting thickness 14mm ,10mm quality cutting thickness in 240v@65PSI 50A; Under 120V, it is 35Amps.Quality cutting thickness is 8mm, Severance cutting thickness is 12mm
- Accessories included:4M PT31 cutting torch, 2.5M Earth clamp,5pcs tips, 5pcs electrodes, 2 meters air hose, 4pcs hose clamp, 1adaptor(110V to 220V), 1 manual.Air regulator,air filter,air gauge are fixed at machine
- The cutting machine can cut carbon steel, stainless steel, steel and other materials. It is an indispensable machine in your tool room
Additional Info :
| Brand | Warfox |
| Color | Multicolor |
| Item Dimensions | |
| Height | 16 |
| Width | 33 |
| Length | 30 |
| Weight | 88.49 |
Plasma Cutter, Spectrum 625, 90PSI, 12ft.
Highlighted Features
- Occupational Health & Safety
- Country of Manifacturer: United States
- Manufacturer: Miller Electric
Additional Info :
| Brand | Plasma |
| Color | White |
| Item Dimensions | |
| Height | 8 |
| Width | 28 |
| Length | 43 |
| Weight | 64.85 |
Hobart - 500575 AirForce 27i Plasma Cutter
Highlighted Features
- Dual-voltage capability with MVP (multi-voltage plug)- allows you to connect to common 120 or 240 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle.
- XT30R torch- Designed for increased comfort with an ergonomic trigger safety, more efficient cooling and economical replacement cutting tips
- Fan-on-demand- cooling system operates only when needed reducing power consumption and contaminants drawn into the machine.
- Power factor correction (PFC) circuitry - Draws up to 30% less amperage for the same cutting range as compared to the competition. PFC expands operators work area via extension cord, while minimizing nuisance circuit breaker trips caused by voltage drops.
- Postflow cooling circuit - Extends life of consumables and torch by cooling them with postflow air after trigger is released.
Additional Info :
| Brand | Hobart |
| Color | Multicolor |
| Item Dimensions | |
| Height | 18 |
| Width | 32 |
| Length | 25 |
| Weight | 65.51 |
Hypertherm 088079 Powermax30 XP Building America Edition Hand Plasma System with Case and 15-Feet Lead
Highlighted Features
- Auto-voltage automatically adapts to 110 V - 240 V input power. Plug adapters included.
- Comes with hard carry case, eye shields, gloves, shoulder strap, standard consumables and Fine Cut consumables.
- Duramax LT torch design provides a sure, comfortable grip made from heat and impact resistant material.
- Auto-voltage automaticvally adapts to 110 V - 240 V input power. Plug adapters included.
- Comes with hard carry case, ehe shields, gloves, shoulder strap, standard consumables and FineCut consumables.
Additional Info :
| Brand | Hypertherm |
| Color | White |
| Item Dimensions | |
| Height | 6 |
| Width | 39 |
| Length | 21 |
| Weight | 23.49 |
Ecotrees Travel Adapter 220v to 110v Travel Adapter Set of 2 / Plug Type C or Plug Type F to Type A (US Standard)/ None Power Convert
Highlighted Features
- Plug type convert adapter from 200v(eu to korea) to 110v US type / Made in korea
- Plug type C or Plug type F convert to Plug Type A (US standard)
- This adapter is not voltage transformer & Use only free voltage supported device or power adapter
- Plug type C : Used in: Europe, with the exception of the UK, Ireland, Cyprus and Malta . The Type C electrical plug (or Europlug) is a two-wire plug that has two round pins. It fits into any socket that accepts 4.0 – 4.8 mm round contacts on 19 mm centres. They are being replaced by E, F, J, K or N sockets which work perfectly with Type C plugs.
- Plug type: F :Used in: Germany, Austria, the Netherlands and Spain The Type F electrical plug (also known as a Schuko plug) has two 4.8 mm round pins spaced 19 mm apart. It is similar to the Type E plug but has two earth clips on the side rather than a female earth contact
Additional Info :
| Brand | Ecotrees |
| Color | Silver |
| Item Dimensions | |
| Height | 13 |
| Width | 25 |
| Length | 21 |
| Weight | 18.16 |
Lincoln Electric Plasma Cutter, P20,20A, 115V
Highlighted Features
- The Lincoln Electric 20 is recommended for cutting sheet metal to 1/8 in.
- Uses standard compressed air, requiring 3.5 CFM @ 65 PSI.
- Inverter design makes the 21 lbs. unit very portable and ideal for HVAC and autobody work.
- Includes cutting torch assembly with 9.5 ft. reach, ground clamp with 8 ft. cable, power cord and plug.
- Operates on 115V, 20 amp for max. output, 115V, 15 amp for 10-15 amp output.
Additional Info :
| Brand | Lincoln |
| Color | White |
| Item Dimensions | |
| Height | 20 |
| Width | 39 |
| Length | 26 |
| Weight | 91.63 |
Weldpro 200 Amp MIG210LCD Dual Voltage 115V/230V 5 in 1 Multi-Process MIG/Fluxcore/DC Lift TIG/Stick Welder Aluminum Spool Gun Capable with Spot Timer and Auto-Set 3 year warranty welding machine
Highlighted Features
- Weldpro’s flagship 200 amp multi function MIG welder with LCD display. Now with exciting new added features and easy access menus offers amazing versatility for more precise welding results.
- The model 210 LCD is also capable of true lift TIG welding as well as stick welding and aluminum welding with the optional spool gun. The MIG 210LCD is not only an intuitive synergically designed MIG / Flux Core welding machine, but now offers the option for total independent voltage and wire speed control.
- MIG, Stick or Lift TIG welding all from a single compact, space-saving unit. Welding Amperage Ranges230V: MIG: 40-200A; MMA: 20-180A; TIG: 20-180A. 30% at 200 Amp rated duty cycle
- Added new features include in MIG Mode, Run-In, Spot Weld, Gas Choice, Synergic or Full Manual controls, on screen polarity swapping for Flux Core vs Gas MIG. and in Stick (MMA) mode, On screen electrode type choices, Hot Start, and Arc Force.
- Color LCD display easy to read and set amperage and wire speed for repeatable welds every time. VRD high temp and overload protection with indication. User adjustable inductance settings.
Additional Info :
| Brand | Weldpro |
| Color | White |
| Item Dimensions | |
| Height | 5 |
| Width | 22 |
| Length | 33 |
| Weight | 23.35 |
Thing to Consider Before Buying 120V Plasma Cutter
When it comes to choosing a product from a wide range of options, several factors go into consideration. And this consideration includes factors such as price, quality, warranty, and many more. So, without further ado, let us dive deep into these factors.
Quality
The most important factor that needs to be considered when purchasing 120V Plasma Cutters is quality. Checking the quality of the product will help you to determine whether it is worth the money or not. And to ensure quality, make sure to check the certifications of the product. These certifications will give you a clear idea about the manufacturing practices used to maintain top-notch quality.
Features
A product comes with several features, and this is typically the deciding factor when it comes to choosing an item. Features in a product are an essential factor to consider as they refer to how the item benefits us. While a few items come with a wide range of features, not all of them are useful to us.
Check out the features of the [120V Plasma Cutter 02] and make sure that they meet the requirements you are looking for. Ensure these features and pick a product that matches your needs in the best possible manner.
Material
The next factor that requires proper attention is the material of the item. Each material has its quality and specialty. So considering it will give you a proper idea about the product. One product is available in a lot of material options as it varies from manufacturer to manufacturer. Comb through the available material options to pick one that matches your search. The best bet would be on the one that’s more durable and aesthetically pleasing.
Warranty
The warranty of an item is a clear sign that the manufacturers are confident about the product. However, not all manufacturers will provide you with a warranty, and this does not affect the quality of the product. But considering the warranty policy of an item can benefit you in several ways.
Check out if there is a warranty available and the terms and conditions associated with it. Make sure to go for the one with the warranty if the other factors match your search as well. This warranty will help you to get a return or replacement in case it fails to provide proper service. In a few cases, you will also be eligible for a full or partial refund.
Cost
While the cost is not the most important factor, it is still a key part of the demographic. However, completely basing the decision on the price is not a good idea. If you take a look at the market, you will notice that one product is available at a wide range of prices.
Finding a product that suits the budget while matching the requirements can be difficult, but not impossible. Research the 120V Plasma Cutter options properly and make sure that the item fits the important factors and the budget.
Reviews and Feedback
Reviews and customer feedback on a product are typically where we focus the most. These reviews usually come from the personal experience of the customers, and they usually talk about the positive sides of the product. However, the feedback from the customers also reveals the negative aspects of the item.
The positivity of these reviews often influences the decision of the buyers. But the cons of this product rarely affect the decision. However, the negative aspects of the product prepare you for what to expect from the item.
FAQ
Properly researching 120V Plasma Cutters will help you to pick the right product from the market. Related questions often help us to solve a conflict that research and reviews cannot help with. So, know the answers to some of the frequently asked questions.
Is Purchase 120V Plasma Cutter From Online Marketplace Worth It?
The online marketplace has both advantages and disadvantages. While you get a wider area to research and look for the product, scams or frauds are difficult to identify. However, if you properly research the item, then ordering 120V Plasma Cutters online is safe and worth it.
Can I Go For A Product Without A Warranty?
The warranty of a product works as an extra layer of security. It prevents the trouble of replacing the product and makes sure that you do not have to pay extra. However, many manufacturers do not include a warranty with their items.
If a warranty is available, then going for it is the best option. But if the product matches your requirements for features and quality, then a warranty is not the deciding factor.
CONCLUSION
In the current market, finding the perfect product often turns out to be a struggle. With so many replicas and copies available, getting your hands on an authentic product requires deep research. Not to mention the misleading reviews and advertisements that often influence our decisions.
So, make sure to rely on the buying guide and your research when choosing the best 120V Plasma Cutter. Pay attention to the ratings and check out the detailed reviews to understand the ups and downs of the product. Be a smart customer and know your requirements well before diving into the market.